- The product is 2G Plastic Fuse Adhesive
- Even Most Kids' Toys
- The product is manufactured in China
- This item is not for sale in Catalina Island
- Package include :1 pcs
- Weight: 2 grams Note:- The return of these products is only possible in case of damage while transit.
APPLICATION DIRECTIONS: Clean the surface to be bonded. Remove white sleeve from a vial of Primer and replace on the opposite end of vial Squeeze white sleeve to break inner glass ampule, allowing Primer to flow into felt applicator tip. Apply Primer to both surfaces. Allow drying for 1 minute. Apply 1 drop of Future Glue gel per square inch to one surface and press parts together. Hold 20 seconds. Allow curing without moving assembly. Full strength will be achieved in 5-10 minutes. Dispose of opened Primer ampule Retain unopened ampule for next bonding job. Store with tip-up in a cool, dry place.
TUBE DIRECTIONS: TUBE MUST BE PIERCED BEFORE USING! Remove outer cap and nozzle. POINT TUBE AWAY FROM FACE AND BODY. DO NOT SQUEEZE TUBE WHILE PUNCTURING. Pierce tube with a point on the outer cap. Repiace nozzle before use. Refer to application directions for use. Clean tip after use. Replace outer cap and store in a cool, dry place.
ADHESIVE / Contains ethyl cyanoacrylate. Protect work surfaces and use with adequate ventilation. Avoid contact with clothing as can cause a burn. For accidental eye contact, flush with water for 15 minutes; get medical attention for eye or internal contact. To remove from skin, soak in acetone nail polish remover and gently peel the adhesive off with fingernail: water exposure will wear off residual adhesive within a few days (do not use polish remover around the eye area). KEEP OUT OF REACH OF CHILDREN.
